Vacuum Casting 
From 1 to 50+ Parts 
Global Delivery 10 days
Nowadays, the world advocates environmental protection, and the selection of silicone molds is also very much. The silicone mold is a very environmentally friendly process, and the products produced are transparent, and can also be made according to the color specified by the customer. The color selectivity is more than that of the injection molding. In terms of silicone molds, the production time is very fast. Generally, it can be finished on the same day. It can achieve higher precision products, and the surface of the product is very smooth. It is not necessary to make surface treatment again. If other special surfaces are needed, we You can also choose to make a spray paint.

In general, vacuum casting is very advantageous for the production of prototypes and the production of small batches.

Contact us for more information .
Vacuum Casting Service
Nowadays, the world advocates environmental protection, and the selection of silicone molds is also very much. The silicone mold is a very environmentally friendly process, and the products produced are transparent, and can also be made according to the color specified by the customer. The color selectivity is more than that of the injection molding. In terms of silicone molds, the production time is very fast. Generally, it can be finished on the same day. It can achieve higher precision products, and the surface of the product is very smooth. It is not necessary to make surface treatment again. If other special surfaces are needed, we You can also choose to make a spray paint. 

In general, vacuum casting is very advantageous for the production of prototypes and the production of small batches. Contact us for more information .
Advantages of Vacuum Casting
1: Vacuum casting is also a process of rapid prototyping. It's not like making a mold for a long time, but a few days to complete the product.

2: The choice of color is more diversified, and the surface of the produced product is very smooth. It is also possible to make very large products.

3: Compared with 3D printing, CNC machining and so on , the price of silicone mold is the cheapest one, which is also a great advantage for product development. 

4: The production of prototypes and small batches currently has a big advantage.
1: Vacuum casting is also a process of rapid prototyping. It's not like making a mold for a long time, but a few days to complete the product. 

2: The choice of color is more diversified, and the surface of the produced product is very smooth. It is also possible to make very large products. 

3: Compared with 3D printing, CNC machining and so on , the price of silicone mold is the cheapest one, which is also a great advantage for product development. 

4: The production of prototypes and small batches currently has a big advantage.
Common Applications for Vacuum Casting 
Visual prototypes
Concept proofs
Cases and covers
Low-volume production
Market testing
Automobile tail light
Trade shows
Armarium
How Much Do You Know
Vacuum Casting?
Vacuum casting, as its name suggests, is insulated from air by injecting liquid material into the mold by vacuum, which is not the same as injection molding.


Vacuum casting is effective in controlling bubbles, so there is always a very good surface, and the taillights of the car are made by vacuum casting.


Vacuum casting and computer simulation analysis of the mold can predict the generation of casting defects, which can save time and improve production efficiency for the design of the mold design.


The vacuum die casting method greatly reduces the back pressure of the cavity, and can use a lower specific pressure and an alloy with poor casting properties, and it is possible to die-cast a larger casting with a small machine;
Vacuum casting, as its name suggests, is insulated from air by injecting liquid material into the mold by vacuum, which is not the same as injection molding.

Vacuum casting is effective in controlling bubbles, so there is always a very good surface, and the taillights of the car are made by vacuum casting.

Vacuum casting and computer simulation analysis of the mold can predict the generation of casting defects, which can save time and improve production efficiency for the design of the mold design.

The vacuum die casting method greatly reduces the back pressure of the cavity, and can use a lower specific pressure and an alloy with poor casting properties, and it is possible to die-cast a larger casting with a small machine;
1. The mold silicone and the curing agent are evenly stirred. The appearance of the mold silica gel is a flowing liquid, the component A is silica gel, and the component B is a curing agent. For example, 100 g of silica gel is added, and 2 g of a curing agent is added (Note: the silica gel and the curing agent must be uniformly stirred, if not stirred uniformly, The mold will have a condition of uneven curing and drying, which will affect the service life of the silicone mold, and the number of times of mold turning, and even cause the mold to be scrapped.

2. Vacuum evacuation treatment. After the silica gel and the curing agent are evenly stirred, the vacuum is exhausted. The time for vacuuming should not be too long, generally not more than 10 minutes. Otherwise, the silica gel cures to produce a cross-linking reaction, which cannot be painted or poured, resulting in material waste.

3. Brushing the operation process. Pour the silica gel that has been bubbled on the master mold by brushing or pouring (make a release agent or mold release agent on the master mold before brushing or pouring), the brush mold must be even, and stick a layer after 30 minutes. Sand cloth or fiberglass cloth to increase the strength and tension of the mold; then apply a second time, then paste a layer of gauze or fiberglass cloth, and then apply silica gel. The mold thus treated has the service life and overmolding. More times, long service life, cost savings and improved efficiency.

4. The production of the outer mold. Generally, the method is to surround the mold with rubber sheets or wooden boards. One is to fill the mold frame with gypsum, and the other outer mold is coated with resin, coated with a layer of resin and coated. Brush a layer of fiberglass cloth, then brush and paste, and repeat the two or three layers to complete the outer mold.

5. The situation that the ratio of silica gel (silicone, lycopene) and curing agent is reflected. It is recommended that the amount of curing agent not more than 5%, the greater the proportion of curing agent, the faster the curing time, the more brittle the mold and the short service life. According to the product and process requirements, the amount of silicone oil can be added in an appropriate amount, and the molding effect is better. Note that the silicone oil should not be excessive (5%-10%), otherwise, it will affect the tensile strength and hardness of the silicone mold.
1. The mold silicone and the curing agent are evenly stirred. The appearance of the mold silica gel is a flowing liquid, the component A is silica gel, and the component B is a curing agent. For example, 100 g of silica gel is added, and 2 g of a curing agent is added (Note: the silica gel and the curing agent must be uniformly stirred, if not stirred uniformly, The mold will have a condition of uneven curing and drying, which will affect the service life of the silicone mold, and the number of times of mold turning, and even cause the mold to be scrapped.

2. Vacuum evacuation treatment. After the silica gel and the curing agent are evenly stirred, the vacuum is exhausted. The time for vacuuming should not be too long, generally not more than 10 minutes. Otherwise, the silica gel cures to produce a cross-linking reaction, which cannot be painted or poured, resulting in material waste.

3. Brushing the operation process. Pour the silica gel that has been bubbled on the master mold by brushing or pouring (make a release agent or mold release agent on the master mold before brushing or pouring), the brush mold must be even, and stick a layer after 30 minutes. Sand cloth or fiberglass cloth to increase the strength and tension of the mold; then apply a second time, then paste a layer of gauze or fiberglass cloth, and then apply silica gel. The mold thus treated has the service life and overmolding. More times, long service life, cost savings and improved efficiency.

4. The production of the outer mold. Generally, the method is to surround the mold with rubber sheets or wooden boards. One is to fill the mold frame with gypsum, and the other outer mold is coated with resin, coated with a layer of resin and coated. Brush a layer of fiberglass cloth, then brush and paste, and repeat the two or three layers to complete the outer mold.

5. The situation that the ratio of silica gel (silicone, lycopene) and curing agent is reflected. It is recommended that the amount of curing agent not more than 5%, the greater the proportion of curing agent, the faster the curing time, the more brittle the mold and the short service life. According to the product and process requirements, the amount of silicone oil can be added in an appropriate amount, and the molding effect is better. Note that the silicone oil should not be excessive (5%-10%), otherwise, it will affect the tensile strength and hardness of the silicone mold.
How to make Silicone Molding ?
Start Your Project With A Free Quote