Classification and application of PA materials

Nylon is a kind of engineering plastic with excellent performance. It has excellent mechanical properties, outstanding corrosion resistance, oil resistance, heat resistance, high modulus and other advantages. Reinforcement and flame-retardant modification can significantly improve its heat resistance, modulus dimensional stability and flame retardancy, and are widely used in industries such as automobiles, electronic and electrical, and power tools.

     

Glass fiber reinforced nylon
Glass fiber reinforced nylon material is a plastic obtained by adding a certain amount of glass fiber to nylon resin for reinforcement. Glass fiber reinforced nylon material has excellent mechanical properties, good heat resistance, good dimensional stability, good self-lubricity and wear resistance, good injection molding performance and appearance, good coloring performance, low temperature resistance, etc. Performance advantages.
PA66 101L American DuPont General purpose grade, with lubricating nylon 66, to improve the machine’s feeding and mold release properties. Reach UL94V-2 level and meet the application of U.S. FDA food safety standards.

Classification of various models of PA:

PA66 101F American DuPont General purpose grade, similar to 101L, good fluidity, suitable for thin-walled and long parts design.

PA66 103HSL American DuPont injection molding, more heat-resistant and lubricating nylon 66 than 101L. The UL temperature index can reach 140℃, the heating life is the best, and the electrical performance is good.

PA66 103FHS American DuPont Fast crystallization type, thermally stable, similar to 103HSL, more suitable for thin-walled and longer product design requirements.

PA66 408L American DuPont injection molding, toughened grade, lubricated nylon 66. Suitable for toys, sports, water and outdoor products.

PA66 408HS DuPont, USA. Toughness, same as 408L. It has better heat stability and impact resistance.

PA66 1402S JPN Asahi Kasei General purpose grade, better heat stability than ordinary nylon.

PA66 ST801 American DuPont injection molding, super tough nylon 66. It is an outstanding impact resistant material, suitable for cold resistance and multiple outdoor impacts, and has excellent low temperature performance. Adding Nanjing Sutai-compatible toughening agent ST-1 to nylon can greatly improve the impact strength of nylon.

PA66 FR7025V0F American DuPont injection molding, flame retardant nylon 66. It can achieve UL94V-0 characteristics at 0.75mm thickness.

PA612 151L American DuPont injection molding, transparent appearance, lubricating nylon 612. It is a material with low moisture absorption, dimensional stability and good material, suitable for bearings, precision gears, and stationery products.

PA612 158L American DuPont has higher viscosity and greater toughness than 151L. More suitable for extrusion.

PA612 77G33HS1L DuPont, USA Reinforced 33% GF, heat-resistant, stable and lubricated nylon 612, it is a material with low moisture absorption and excellent dimensional stability.

PA612 77G43L Natural color black DuPont, USA Reinforced 43% GF, lubricated nylon 612, is a material with low moisture absorption and excellent dimensional stability.

PA66 70G13L DuPont, USA, injection molding, nylon 66 reinforced with 13% GF glass fiber.

PA66 70G13HS1L DuPont, USA Injection molding, more heat-resistant stable grade 13%GF glass fiber reinforced nylon 66.

PA66 70G33L DuPont, USA Injection molding, 33% GF glass fiber reinforced nylon 66.

PA66 70G33HS1L DuPont, USA Injection molding, more heat-resistant and stable, 33% GF glass fiber reinforced nylon 66.

PA66 70G30HSLR American DuPont Injection molding, stable heat resistance, excellent hydrolysis resistance, 30% glass fiber reinforced nylon 66. Suitable for products in contact with water.

PA66 70G43L DuPont, USA Injection molding, 43% glass fiber reinforced nylon 66.

PA66 70G50HSLA BK039B Black DuPont, USA Injection molding, heat-resistant stable grade, 50% glass fiber reinforced nylon 66. Top of form

PA66 74G33J United States DuPont injection molding, 33% glass fiber reinforced surface modified nylon 6/66, reducing surface floating phenomenon, especially suitable for external parts that require high rigidity and improved appearance, such as hairdressing appliances, power tool housings.

PA66 74G43J United States DuPont injection molding, 43% glass fiber reinforced surface modified nylon 6/66, reducing surface floating phenomenon, especially suitable for external parts that require high rigidity and improved appearance

PA66 8018 (80G14) DuPont, USA Injection molding, 14% glass fiber reinforced and super tough nylon 66, is a high-strength, impact-resistant and low-temperature resistant material.

PA66 80G33HS1L American DuPont injection molding, stable heat resistance, 33% glass fiber reinforced and super tough nylon 66, is a kind of high strength, super high impact resistance, low temperature resistance material.

PA66 71G33L DuPont, USA. Injection molding, 33% glass fiber reinforced and toughened nylon 66. It is a high-strength, impact-resistant and low-temperature resistant material. PA66 75LG50HSL DuPont is a kind of nylon 66 reinforced with 50% long glass fiber and stable in heat resistance.

PA66 FR50 American DuPont injection molding, 25% glass fiber reinforced and flame retardant nylon 66. It can reach UL94V-0 characteristics at 0.35mm thickness. PA66 10B40 American DuPont Minlon 10B40 injection molding, 40% mineral reinforced nylon 66.

PA6T (PPA) HTN 51G35HSL American DuPont injection molding, 35% glass fiber reinforced high temperature resistant nylon 6T, with heat stabilizer and lubricity. It has extremely low water absorption, low warpage, chemical resistance, high dimensional stability, and can maintain superior performance in environments below 175°C.

PA6T (PPA) HTN FR52G30BL American DuPont injection molding, 30% glass fiber reinforced high temperature nylon 6T, flame retardant and lubricity. It has very low water absorption, low warpage, chemical resistance, high dimensional stability, and achieves UL94V-0 effect at a thickness of 0.75mm.

PA6T (PPA) HTN FR52G30LX DuPont 30%GF, flame retardant high performance polyamide resin developed for lead-free soldering conditions

PA6T (PPA) HTN FR52G30NH United States DuPont injection molding, 30% glass fiber reinforced high temperature resistant nylon 6T, flame retardant and lubricity. With extremely low water absorption, low warpage, chemical resistance, high dimensional stability, UL94V-0 effect can be achieved at 0.4mm thickness

PA6T (PPA) HTN 52G35HSL American DuPont injection molding, 35% glass fiber reinforced high temperature resistant nylon 6T, with heat stabilizer and lubricity. With extremely low water absorption, low warpage, chemical resistance, high dimensional stability, it can be produced by water heating molds.

PA6T (PPA) HTN 53G50HSLR American DuPont 50% GF, heat stabilized, lubricated, with improved impact, stiffness and hydrolysis resistance

PA6 7331J American DuPont General purpose grade, with lubricating nylon 6, to improve machine feeding and model release

PA6 73G30L DuPont, USA General injection molding, 30% glass fiber reinforced nylon 6 with lubricity to improve machine feeding and mold release

PA6 BKV30H1.0 LANXESS (Bayer) injection molding, 30% glass fiber reinforced nylon 6

PA6 B3EG3 Germany BASF injection molding, 15% glass fiber reinforced nylon 6 window top

PA6 B3EG6 German BASF injection molding, 30% glass fiber reinforced nylon 6

PA6 B3ZG6 Germany BASF injection molding, 30% glass fiber reinforced nylon 6 with improved toughness

PA6 BG-50S Swiss EMS injection molding, 50% glass fiber reinforced nylon 6

PA6 CM1014-V0 JPN Toray General injection molding, not reinforced, flame retardant V0 grade nylon 6

PA6 BFG30 Taiwan injection molding, 30% glass fiber reinforced nylon 6

PA6 BFG50 Taiwan injection molding, 50% glass fiber reinforced nylon 6

PA6 BFG15 Taiwan injection molding, 15% glass fiber reinforced nylon 6

PA6 BFM30 Taiwan injection molding, 30% glass fiber/mineral blend reinforced nylon 6, suitable for car lamp holders, spraying or electroplating.

PA6 BTE902 Taiwan injection molding, no reinforcement, low temperature resistance to minus 30 ℃, impact modified nylon 6, suitable for ice skates and other sports equipment. PA6/66 CFG30 Taiwan injection molding, 33% glass fiber reinforced surface modified nylon 6/66, reducing surface floating phenomenon, especially suitable for external parts that require high rigidity and improved appearance, such as hairdressing appliances, power tool housings.

PA66 AF5206 Taiwan General general purpose grade, with lubricating nylon 66, to improve machine feeding and mold release performance, reaching UL94V-2 level

PA66 AFG15 Taiwan injection molding, 15%GF glass fiber reinforced nylon 66

PA66 AFG30 Taiwan injection molding, 30%GF glass fiber reinforced nylon 66

PA66 AFG45 Taiwan injection molding, 45% GF glass fiber reinforced nylon 66

PA66 ATE901 Taiwan Injection molding, no reinforcement, super tough nylon 66. It is an outstanding impact-resistant material, suitable for cold-resistant and outdoor multiple impacts, and has excellent low-temperature performance.

PA66 MX8018 Taiwan injection molding, 15% glass fiber reinforced and super tough nylon 66, is a high-strength, impact-resistant, low-temperature resistant material.

PA66 A3K German BASF general grade, similar to 101L

PA66 A3EG6 Germany BASF injection molding, 30%GF glass fiber reinforced nylon 66

PA66 A3WG6 German BASF injection molding, 30%GF glass fiber reinforced nylon 66, more heat-resistant

PA66 A3WG10 German BASF injection molding, 50% GF glass fiber high hardness material, can replace cast aluminum alloy, etc.

PA GV-5H EMS semi-crystalline type, containing aromatic polyamide, reinforced 50% glass fiber, low moisture absorption, good dimensional stability, good chemical resistance, high strength, high hardness material, can replace cast aluminum alloy, etc.

PA GV-6H EMS Semi-crystalline, containing aromatic polyamide, reinforced 60% glass fiber, low moisture absorption, good dimensional stability, good chemical resistance, high strength, high hardness material, can replace cast aluminum alloy, etc.

PPA(PA6T/6I) HTV-5H1 EMS semi-crystalline, containing aromatic polyamide, reinforced 50% glass fiber, high temperature resistance, low moisture absorption, good dimensional stability, good chemical resistance, high strength, high hardness material, Can replace cast aluminum alloy, etc.

PA12 TR55 EMS Transparent nylon 12, low water absorption, good toughness, high hardness, non-flammability

PA12 LV-3H EMS PA12 reinforced with 30% GF, heat resistance, chemical resistance, low water absorption, dimensional stability, good toughness

PA12 L25W40X EMS heat resistance, UV resistance, suitable for squeezing tubing