(Polystyrene) Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.6-0.8% Molding temperature: 170-250℃ Material performance Excellent electrical insulation (especially high-frequency insulation), colorless and transparent, light transmittance second only to plexiglass, coloring, water resistance, and good chemical stability. The strength is moderate, but the quality is brittle, and it is easy to cause stress brittleness. Resistant to benzene,…

ABS plastic (Acrylonitrile Butadiene Styrene) Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.4-0.7% Molding temperature: 200-240℃ Drying conditions: 80-90℃ 2 hours Material performance 1. Good overall performance, high impact strength, chemical stability, and good electrical properties 2.Good weldability with 372 plexiglass, made of two-color plastic parts, and can be chrome-plated and painted. 3. There are high…

Parameters: Material name: TPU Printing temperature: 210-225° Material density: 1.2g/cm³ Material hardness: 95HSA Elongation: 400% Print bottom plate temperature: room temperature -50° Bubble: no bubbles Characteristic: 1: High transparency-high resilience, suitable for printing shoes, insoles and other soft models 2: High mechanical strength-high wear resistance and aging resistance 3: Waterproof and moisture permeability, cold proof,…

Parameters: Material name: PA (nylon) Printing temperature: 240-280° Material density: 1.01±0.05g/cm³ Water absorption: easy to absorb water Tensile strength: ≥50MPa Elongation at break: ≥150.0% Bubble: no bubbles characteristic: 1: High purity-the material uses high-quality nylon particles, non-toxic, non-irritating, healthy and safe, will not block the nozzle, and will not cause insufficient extrusion 2: High precision-the…

Parameters: Material name: ABS Printing temperature: 220-240° Material density: 1.04±0.2g/cm3 Water absorption: 1% Tensile strength: ≥43MPa Elongation at break: ≥10.0% Bubble: no bubbles Characteristic: 1: High strength-stronger than PLA, impact resistance, heat resistance, chemical resistance, and difficult to degrade, more suitable for manufacturing 2: High precision-the wire diameter tolerance is controlled within 0.02mm, which is…

High Density Polyethylene (HDPE for short) is a non-polar thermoplastic resin with high crystallinity. The appearance of the original HDPE is milky white, and the thin section is translucent to a certain extent. PE has excellent resistance to most domestic and industrial or chemical preservation properties, and will produce chemical and acid resistant fermentation products….

Desde utensilios de cocina hasta ingeniería aeroespacial, las aplicaciones y la clasificación del teflón no tienen límites. Es bien conocido por su fuerza, excelente resistencia a la temperatura y naturaleza antiadherente. Sin embargo, este material es más complejo de lo que parece.   Los revestimientos de teflón también son muy útiles para proteger el material…

PVC is the abbreviation of polyvinyl chloride and its English name is Polyvinylchloride. The main component is polyvinyl chloride. It is bright in color, corrosion-resistant, strong and durable. It is reinforced by adding some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process. Its heat resistance, toughness, ductility, etc., so its…